Hardware compatibility: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
[[Category:ATW800/2]] | [[Category:ATW800/2]] | ||
== | === Hardware successfully tested with the ATW800/2 === | ||
As for now we positively tested the ATW800/2 against these accelerators: | As for now we positively tested the ATW800/2 against these accelerators: | ||
| Line 6: | Line 6: | ||
* AdSpeed | * AdSpeed | ||
* Turbo25 | * Turbo25 | ||
* PAK68 | |||
* PAK68/2 | |||
* PAK030 (Set your ATW800/2 ROM to TOS1.04) | * PAK030 (Set your ATW800/2 ROM to TOS1.04) | ||
* TerribleFire 536 | * TerribleFire 536 | ||
| Line 14: | Line 16: | ||
* Cloudy(-Storm) ST (Remove your ATW800/2's ROM chips) | * Cloudy(-Storm) ST (Remove your ATW800/2's ROM chips) | ||
* Thunder TT & Storm TT | * Thunder TT & Storm TT | ||
* Magnum ST (Most alternate RAM solution should work) | |||
* c´t IDE Interface (needs patched GALs available in the ATW800/2 fileshare) | |||
=== Known issues === | |||
Speeding up your system bus (i.e. beyond the standard 8 or 16Mhz) might result in pixel errors. | |||
An accelerator known for doing this is the '''DSTB1'''. | |||
To be continued... | To be continued... | ||
Revision as of 12:29, 16 May 2025
Hardware successfully tested with the ATW800/2
As for now we positively tested the ATW800/2 against these accelerators:
- AdSpeed
- Turbo25
- PAK68
- PAK68/2
- PAK030 (Set your ATW800/2 ROM to TOS1.04)
- TerribleFire 536
Also those devices seem to work OK up to now (more in-depth testing needed):
- Lightning ST
- Cloudy(-Storm) ST (Remove your ATW800/2's ROM chips)
- Thunder TT & Storm TT
- Magnum ST (Most alternate RAM solution should work)
- c´t IDE Interface (needs patched GALs available in the ATW800/2 fileshare)
Known issues
Speeding up your system bus (i.e. beyond the standard 8 or 16Mhz) might result in pixel errors.
An accelerator known for doing this is the DSTB1.
To be continued...