Jump to content

Hardware compatibility

From GeekDotWiki
Revision as of 14:06, 26 March 2026 by Geekdot (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Hardware successfully tested with the ATW800/2

As for now we positively tested the ATW800/2 against these accelerators:

  • AdSpeed
  • Turbo25
  • PAK68
  • PAK68/2
  • PAK030 (Set your ATW800/2 ROM to TOS1.04)
  • TerribleFire 536
  • SpeedyTT

Also those devices seem to work OK up to now (more in-depth testing needed):

  • Lightning ST
  • Cloudy(-Storm) ST (Remove your ATW800/2's ROM chips)
  • Thunder TT & Storm TT
  • Magnum ST (Most alternate RAM solution should work)
  • c´t IDE Interface (needs patched GALs available in the ATW800/2 fileshare)

Known issues

Speeding up your system bus (i.e. beyond the standard 8 or 16Mhz) might result in pixel errors.

  • An accelerator known for doing this is the DSTB1.
  • Overclocked TTs (e.g. 48Mhz) might show artefacts on the screen. It was reported, that disabling the cache might help in this case.

Known incompatibilities

  • OverScan ST is incompatible with the ATW800/2

To be continued...

Retrieved from "https://wiki.geekdot.com/index.php?title=Hardware_compatibility&oldid=80"